The Clutch Hutch

Picture

From the moment I first saw my kitchen, I thought to myself… “Poor thing, just needs a little love”. That being said, that “poor thing” has haunted me for the better part of a year and made it veeeeeery difficult to love, even just a little.

I admit that a lot of the grief has stemmed from the fact that I just couldn’t make up my mind about what to do with it. It’s a small space dominated by five floor-to-ceiling windows. I know what you must be thinking… “How on earth could that possibly be a bad thing?”

Don’t get me wrong, the natural light in that kitchen is perfect. The view is great! That’s where the praise ends. The windows wrap around the edges of the room, effectively cutting off 40% of my potential cabinet and counter space. And I can’t put anything in front of them because they are floor-to-ceiling.

While one half of the kitchen was going to stay the way it was in terms of placement, I had only one measly little wall to turn into a fabulous spot for my refrigerator, trash can, recycling bin, food pantry, and extra counter space. Tall order.

Picture

My first idea was a small island. I even started building it. I got pretty far along before we bought a new refrigerator. We did not measure the depth of the new fridge because we did not think it would make a difference. But guess what? It very much did. We got it delivered and installed within a few days and we loved it! That is, until I stood in front of it and opened the doors. That’s when I realized that I was standing in the middle of the kitchen. Oops! No island for us.

The original fridge was a lot smaller. It was also white. New fridge… stainless steel. So of course, we’re going to have to replace all of our other appliances eventually.

Back to square one. We ripped out the cabinets that were above the original fridge and moved the fridge closer to the windows. I measured the big blank space on the wall and went to work in search of a dresser I could put there with some shelves over it. I went to every thrift store in the area several times each week. I swear they recognize me now. It took me a while, but I finally found the perfect piece. The moment I saw it, I knew I had to have it.

Picture

I would love to say I purchased it, had it placed in my car, and drove home with it, but that’s not exactly how it all went down. I did purchase it. I did have it placed in my car. Well… sort of. I had the bottom of it placed in my car. The top would not fit. I tried my mom’s car. Wouldn’t fit. I drove to my brother’s apartment, measured his car, thought it would fit, then had him drive his car out to pick it up for me. Wouldn’t fit. I called the U-Haul store two miles down the road. They told me they had a pickup I could rent right then and there. I arrived within 5 minutes of the conversation. The guy in front of me in line had rented it. The lady I spoke to called another store a few miles further down the road. They had a pickup available. This time she reserved it for me in the system. So finally, after many failed attempts, I managed to secure a truck that would haul my baby home.

Once I got it there, I set it in the garage. Normally, the garage is where projects go to die. It seems ironic to me now that I placed my new hutch next to the skeleton of my unfinished kitchen island that I’d pillaged for parts. If I hadn’t had a reason to finish my kitchen ASAP (company…ahhhh!!!), that hutch might still be sitting in the same spot. But as fate would have it, this was a project that I finished in a timely fashion.

Picture

Kitchen island skeleton in the garage – with my shadow looming over it (I suck at pictures)

 

Picture

Sizing up the hutch in the kitchen – perfect fit!

As you can see, it was a dark wood color when I bought it. But as you might know from my Cabinet Magic post, my new kitchen cabinets are white. I decided to paint the whole thing white. However, I did want it to have a different color counter top. I planned to put our Keurig there and coffee and white just don’t mix. So I decided to re-stain the counter top portion and paint the rest white. I eventually want to get rid of the counter tops in the rest of the kitchen and install DIY butcher block, so it seemed like the perfect solution.

I removed the top portion of the hutch and started with that piece. Don’t ask me why. Probably because it seemed less threatening. I was wrong, of course. The top was much harder to complete than the bottom. I removed the shelves and starting sanding everything using a sanding block.

Picture

Once I had it sanded, I used an oil-based primer and applied two layers, sanding in between coats. Per the usual, it looked TERRIBLE with just the primer on. Luckily, this wasn’t my first rodeo, and I knew not to panic. I painted two more layers of white paint over the primer, sanding in between coats. I used the same paint I used to paint my kitchen cabinets so everything would match.

Edit: If you read my Kitchen Cabinet Makeover post, you’ll see that the paint started to flake after a while, so I added two layers of polycrylic after the fact. I did the same with this project.)

Picture

Once the top was finished, I got to work on the bottom. I sanded down the countertop portion of it and stained it with a walnut stain. I did two layers, allowing several hours in between coats to dry. I applied two coats of polyurethane as well.

Picture

I let the last coat dry for 24 hours while I painted the bottom with two layers of primer, two layers of paint, and two layers of polycrylic.

Picture

Picture

The hutch hardware was bronze when I purchased it, and my cabinet hardware is nickel, so I decided to spray paint the hardware that came with the hutch. I thought about replacing it with the same hardware I used for the cabinets, but I really liked the hutch hardware so I decided to keep it. I placed the hardware in a small cardboard box to contain the mist and sprayed each piece with several layers.

Picture

Once completed and dry, I had the hubby help me get the finished product into the kitchen where we reattached the two parts and placed it in its new home. It was perfect!!!!

I went a little crazy with the hutch décor. I bought some new food containers. Displaying food out in the open is such a space saver! I even bought little black sticker labels for my mason jars and wrote the names of the foods with a chalk marker.

Picture

I purchased a basket for all the items I didn’t want to display.

Picture

Picture

Then I installed some hooks on the bottom of the lowest shelf to hang my coffee mugs over the Keurig.

Picture

Once I had everything placed, I took some well-deserved pictures. I was really impressed with the way everything turned out. The hutch matched the kitchen perfectly. And it solved the kitchen storage space issue without affecting any of the space in front of the windows.

Long story short… this hutch is clutch!

Picture

Kitchen Wall #1

Picture

Kitchen Wall #2

Picture

Kitchen Wall #3

Materials List:

Thrift Store Hutch

Primer

Paint

Sandpaper/Sanding Blocks/Sander

Brushed Nickel Spray Paint

Painters Tape

Walnut Stain

Polyurethane

Polycrylic

Decor:

Food Storage Containers

Black Sticker Labels

Chalk Pen

Coffee Mug Hooks

Mason Jars

Step Recap:

1. Sand all parts that are being painted or stained

2. Stain the part that will be the counter top

3. Allow the stain to dry for a few hours and apply another coat

4. Apply a coat of Polyurethane on top of the stain, allow to dry

5. Apply another coat of polyurethane and allow to dry for 24 hours

6. Apply two layers of primer to all parts that will be painted, sanding in between coats

7. Apply two layers of paint, sanding in between coats

8. Spray paint the hardware using a small cardboard box

9. Flip the hardware over when dry and spray the other side

10. Re-assemble the parts and hardware

11. Take lots of pictures!

In some instances, I may include affiliate links in posts where I recommend specific products. If you purchase something through one of my affiliate links, I receive a small commission at no extra cost to you. These links are always disclosed.

4 comments

    • craftcribcreations@gmail.com says:

      I always use Minwax brand stains. I believe the one I used on this piece was a Walnut color. As for the paint, I used Valspar. It was just a base white paint, but it is a little bright to be honest. If I could do it again, I would pick something a little more muted, and cover it with a few layers of polycrylic to protect the paint.

Comments are closed.